Dental Materials
Content from the latest issue of Dental Materials.
-
Editorial Board
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages i-i
(no summary available) -
Influence of printing orientation on mechanical properties of aged 3D-printed restorative resins
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 756-763 | Espinar, Cristina; Pérez, María M.; Pulgar, Rosa;...
AbstractObjectiveTo evaluate the influence of printing orientation on flexural strength (σf) and elastic modulus (E) of different 3D printing dental restorative resins. MethodsBar-shaped specimens (n = 20) were fabricated from two SLA-printed resi... -
Effect of Silver Diamine Fluoride on Bonding Performance and Ultra-morphological Characteristics to Sound Dentin
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages e24-e32 | Intajak, Papichaya; Yuan, Yuan; Sakaguchi, Norihito;...
AbstractObjectivesThis study aimed to evaluate microtensile bond strength (µTBS) and ultra-morphological characteristic changes in sound dentin resulting from silver diamine fluoride (SDF) when using adhesives. MethodsNinety-six extracted human th... -
Optimized 3D printed zirconia-reinforced leucite with antibacterial coating for dental applications
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 629-642 | Branco, A.C.; Santos, T.; Bessa, L.J.;...
AbstractObjectivesThis study aims to produce by robocasting leucite/zirconia pieces with suitable mechanical and tribological performance, convenient aesthetics, and antibacterial properties to be used in dental crown replacement. MethodsLeucite p... -
Enhanced remineralisation ability and antibacterial properties of sol-gel glass ionomer cement modified by fluoride containing strontium-based bioactive glass or strontium-containing fluorapatite
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 716-727 | Thongsri, Oranich; Thaitalay, Paritat; Srisuwan, Sawitri;...
AbstractObjectivesThis study aimed to compare two types of bioactive additives which were strontium-containing fluorinated bioactive glass (SrBGF) or strontium-containing fluorapatite (SrFA) added to sol-gel derived glass ionomer cement (SGIC). Th... -
Preparation and optimization of an eggshell membrane-based biomaterial for GTR applications
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 728-738 | Kalluri, Lohitha; Griggs, Jason A.; Janorkar, Amol V.;...
AbstractObjectivesGuided Tissue Regeneration (GTR) is a popular clinical procedure for periodontal tissue regeneration. However, its key component, the barrier membrane, is largely collagen-based and is still quite expensive, posing a financial bu... -
Effects of combined modification of sulfonation, oxygen plasma and silane on the bond strength of PEEK to resin
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages e1-e11 | Ma, Tongtong; Zhang, Jiajia; Liu, Xueye;...
AbstractObjectiveThis study aimed to evaluate the combined effects of sulfonation, non-thermal oxygen plasma and silane on the shear bond strength (SBS) of PEEK to resin materials. Materials and methodsTwo hundred and eighty specimens were randoml... -
Noninvasive assessment of novel nanohybrid resin cement adaptation using cross-polarization optical coherence tomography
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 643-652 | Naguib, Ghada H.; Bakhsh, Turki; Mazhar, Jumana;...
AbstractObjectivesZein-coated magnesium oxide nanoparticles (zMgO NPs) can potentially improve cement adaptation to the tooth-restoration interface, which would aid in minimizing marginal leakage and secondary caries. The aim of this study was to... -
Comparison of subcritical growth parameters of a Y-TZP obtained via cyclic or dynamic fatigue tests
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 747-755 | Fukushima, Karen Akemi; Alhotan, Abdulaziz; Riman, Sahar Ganz;...
AbstractObjectiveThe objective of this study was to 1) compare the stress corrosion coefficient ( n) of a Y-TZP obtained by two fatigue tests: cyclic and dynamic and 2) evaluate the effect of frequency in the characteristic lifetime and the existe... -
Clinical evaluation of posterior restorations over wet and dry dentin using an etch-and-rinse adhesive: A 36-month randomized clinical trial
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 619-628 | González, Claudia C.; Ñaupari-Villasante, Romina; Dos Santos de Castro, Andrea;...
AbstractObjectivesTo evaluate the clinical performance of posterior restorations over wet and dry dentin with an etch-and-rinse adhesive after 36 months of clinical service. MethodsForty-five participants were recruited, each one had at least two... -
Synthesis of a novel monomer “DDTU-IDI” for the development of low-shrinkage dental resin composites
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 608-618 | Zhou, Zixuan; Li, Aihua; Sun, Ke;...
AbstractObjectiveThe current dental resin composites often suffer from polymerization shrinkage, which can lead to microleakage and potentially result in recurring tooth decay. This study presents the synthesis of a novel monomer, (3,9-diethyl-1,5... -
Current speed sintering and high-speed sintering protocols compromise the translucency but not strength of yttria-stabilized zirconia
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 664-673 | Alshahrani, Abdulaziz M.; Lim, Chek Hai; Wolff, Mark S.;...
AbstractObjectivesTo investigate the impacts of speed and high-speed sintering on the densification, microstructure, phase composition, translucency, and flexural strength of yttria-stabilized zirconia (YSZ). MethodsA total of 162 disc-shaped spec... -
Effect of experimental dentin etchants on dentin bond strength, metalloproteinase inhibition, and antibiofilm activity
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages e12-e23 | Sahadi, Beatriz Ometto; Sebold, Maicon; André, Carolina Bosso;...
AbstractObjectivethis study evaluated dentin microtensile bond strength (µTBS) and failure modes (at 24 h and one year), bonding interface regarding hybridization, surface morphology regarding demineralization, in situ metalloproteinase (MMP) acti... -
Gingival fibroblast response to (hybrid) ceramic implant reconstruction surfaces is modulated by biomaterial type and surface treatment
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 689-699 | Rabel, Kerstin; Blankenburg, Andrea; Steinberg, Thorsten;...
AbstractObjectivesSurface characteristics of implant reconstructions determine the gingival fibroblast (GF) response and thus soft tissue integration (STI). However, for monolithic implant reconstructions it is unknown whether the (hybrid) ceramic... -
A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 674-688 | Han, Xingting; Sharma, Neha; Xu, Zeqian;...
AbstractObjectivePolyetheretherketone (PEEK), a biomaterial with appropriate bone-like mechanical properties and excellent biocompatibility, is widely applied in cranio-maxillofacial and dental applications. However, the lack of antibacterial effe... -
Recent advances in additive manufacturing of patient-specific devices for dental and maxillofacial rehabilitation
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 700-715 | Kouhi, Monireh; de Souza Araújo, Isaac J.; Asa’ad, Farah;...
AbstractObjectivesCustomization and the production of patient-specific devices, tailoring the unique anatomy of each patient's jaw and facial structures, are the new frontiers in dentistry and maxillofacial surgery. As a technological advancement,... -
In-vitro-cytotoxicity of self-adhesive dental restorative materials
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 739-746 | Ohlsson, Ella; Bolay, Carola; Arabulan, Sevgi;...
AbstractObjectivesAlthough the introduction of self-adhesive composites in restorative dentistry is very promising, the innovation of new materials also presents challenges and unknowns. Therefore, the aim of this study was to investigate the cyto... -
Strength-limiting damage and defects of dental CAD/CAM full-contour zirconia ceramics
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 653-663 | Kwon, Young-Seok; Kim, Jae-Heon; Lee, Hwalim;...
AbstractObjectiveThis study aimed to compare the four-point flexural strength of CAM-milled and sintered (as-sintered, AS) specimens with those of high-polished (HP) specimens using chairside polishing systems to simulate clinical surface conditio... -
Natural, biphasic calcium phosphate from fish bones for enamel remineralization and dentin tubules occlusion
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 593-607 | Degli Esposti, Lorenzo; Ionescu, Andrei C.; Gandolfi, Sara;...
AbstractObjectivesA calcium phosphate extracted from fish bones (CaP-N) was evaluated for enamel remineralization and dentinal tubules occlusion. MethodsCaP-N was characterized by assessing morphology by SEM, crystallinity by PXRD, and composition... -
Relation between internal adaptation and degree of conversion of short-fiber reinforced resin composites applied in bulk or layered technique in deep MOD cavities
Dental Materials, Volume 40, Issue 4, 2024 Apr, Pages 581-592 | Néma, Viktória; Kunsági-Máté, Sándor; Őri, Zsuzsanna;...
AbstractObjectiveThe purpose was to evaluate the degree of conversion (DC), internal adaptation (IA) and closed porosity (CP) of short-fiber reinforced resin composites (SFRC) associated with layered or bulk restorative procedures in deep MOD cavi...